|
BUILD YOUR
OWN LINE
or pick from
the list of lines available
 |
Spiegler's patented stainless steel braided brake lines eliminate
expansion under the most severe applications. Even under extreme
pressure the lever feel remains consistent.
- DOT and TUV approved for street use.
- Patented torsion system eliminates line twist.
- Kits are available ready to install, or as individual
lines for custom applications.
- A generally unrecognized manufacturer’s recommendation
is that all original rubber hydraulic hoses should be
changed every four years to avoid failure. Spiegler brake
lines are maintenance free and will provide reliable service
for the life of your motorcycle.
- Steel braided brake lines are available with black, red,
blue, carbo / smoke or translucent blue vinyl covering.
- Fittings are available in green, silver, gold, chrome,
blue, black, purple, red or titanium.
- Every kit is tailor-made.
- Kevlar brake lines available.
- Colors of line material and fittings can vary due to
different lighting during photography.
- Lifetime Warranty.
-
Click Here for mounting instructions
|
 |
COLORS
-
BLACK
-
BLUE
-
GREEN
-
RED
-
YELLOW
-
SMOKE
-
CLEAR
-
ORANGE
|
Information we need To order a
line, all we need is your bikes make, model, year, and either front or
rear brakes plus the color you would like
For custom Brake lines we will need the
following.
-
Length of the line, Please
allow for suspension travel. from eye to eye.
-
End types with thread size
-
Strait Banjo
-
Angled Banjo
-
Strait fitting
-
Banjo bolt thread size
-
Color of line
-
It will also help if you
have the bike information.
|
|
PRICING
- Single Line Kit
$ 59.00
to $69.00
- Two
Line Kit
$ 98.00
to $108.00
- Three Line Kit
$ 147.00
- Four
Line Kit
$
196.00
- Five
Line Kit
$
245.00
|
|
STAINLESS STEEL BRAKE
LINES
HVC cycle reproduces the original rubber brake lines with
stainless steel brake lines. We also offer some really cool ideas.
Available in black or natural stainless with clear coating. For the more
common lines, we offer brand brake lines. All of our lines come with
washers and banjo bolts.
We can
custom make almost any brake line, for info and pricing please call.
-
What's good about stainless steel lines?
-
Eliminates power loss due to hose expansion
-
Eliminates spongy brakes
-
Increased brake feel
-
Decreases braking distance
-
Maintenance free
-
Will not deteriorate over time
-
You need more?
Note: For the lines listed below,
we currently have a lot of Galfer brake lines still in stock. we
will ship the Galfer lines out on all orders until we are out of
stock and then switch to the Spiegler lines.
 |
 |
|
RD250/ 350 '73-'75 Upper Line
& Lower line Kit
Stock replacement kit
Upper line mounts to the master cylinder and
runs to
the hard line on the brake Switch manifold
. Lower line mounts to the brake
switch manifold and runs to the brake caliper
hard line.
|
|
RD 250/350/400 Single Line with Micro Brake
Switch
Eliminates the brake
manifold & the hard lines
Brake switch is built into
the master cylinder banjo bolt
Really cleans up the front
end
Available for regular
handle bar & short bars (or clip ons)
|
|
RD 400 Front Line
This line runs from the front master cylinder to
the Brake Caliper Hard Line
|
|
RD 400 Front Line
(Eliminates the Hard line)
This line runs from the front master cylinder to
the Brake Caliper
|
|
RD400 Rear
|
|
Replacement Caliper Hard Line
10mmx1.0 thread. 8" in long.
Replaces
the Hard Line on the front brake caliper.
This line is sold strait and must be bent.
$7.50 (HL3308)
|
|
RD 400 F Daytona Front
|
|
RD 400F Daytona Rear
|
|
RZ350 1983-1985
|
|
RD350 YPVS 1983-1996
|
|
Rear |

$59.00 (32RZ350R) |
|
RZ350 1983-1985
|
|
RD350 YPVS 1983-1996
|
|
RD350LC 1980-1982
|
|
RD250LC 1980-1985 |
|
Front |
|
3 line kit
|
$167.00 (32RZ350F3) |
|
RZ350 1983-1985
|
|
RD350 YPVS 1983-1996
|
|
RD350LC 1980-1982
|
|
RD250LC 1980-1985 |
|
Front |
|
2 line kit
|

(2 lines that run
direct from the master cylinder to the brake calipers)
$98.00 (32RZ350F2) |
|
|
|
|
|
 |
|
|
|
|
|
|